DJI Mini 4 Pro 30 m height limit: not logged in and weak GPS

Mini 4 Pro stuck at 30 m? Not being logged in, a weak GNSS signal, your own max altitude or a GEO zone. What each means and how to clear it.

A DJI Mini 4 Pro flying above a river and pine forest as riders cross on horseback

Image: DJI

Your Mini 4 Pro climbs to 30 m and stops, and DJI Fly says “Max flight altitude reached”. Or it won’t go further than 50 m away. It isn’t broken: DJI builds in several limits that kick in automatically, and the 30 m one has three common causes.

Here’s what each one means and how to clear it, from DJI’s Mini 4 Pro user manual.

Last checked: 18 October 2026, against DJI’s Mini 4 Pro user manual and the CAA’s Drone and Model Aircraft Code.

Quick answer

The Mini 4 Pro is limited to 30 m height and 50 m range if you’re not logged in to DJI Fly. It’s also held to 30 m from the takeoff point when the GNSS signal is weak (or 2 m above the ground in some low-light conditions). Log in to your DJI account, wait for a strong satellite signal before takeoff, and check the max altitude setting in DJI Fly.

Cause 1: you’re not logged in to DJI Fly

DJI’s manual says that, for increased safety, flight is restricted to a height of 30 m and a range of 50 m when you’re not connected or logged into the app during flight. That applies to DJI Fly and every other app that works with DJI drones.

Typical ways this catches people out:

  • a new DJI RC 2 that’s never been signed in,
  • signing out of DJI Fly on your phone, or switching to a different phone,
  • flying with the RC-N2 and no phone connected.

Fix: sign in to your DJI account in DJI Fly before you fly. With the RC 2, connect it to Wi-Fi or a phone hotspot first. DJI Fly’s settings include an option to log in with your DJI account and check your account information.

A computer-generated image of a DJI Mini 4 Pro flying above smooth white cloud
Image: DJI

Cause 2: the GNSS signal is weak

DJI’s flight limit table for the Mini 4 Pro says that with a weak GNSS signal:

ConditionsHeight limit
Lighting is sufficient30 m from the takeoff point
Lighting isn’t sufficient and the 3D infrared sensing system is operating2 m above the ground
Lighting isn’t sufficient and the 3D infrared sensing system isn’t operating30 m from the takeoff point

There’s no distance limit with a weak GNSS signal.

The good news is in DJI’s note underneath: each time the drone is powered on, the 2 m or 30 m limit is removed automatically as soon as the GNSS signal becomes strong (signal strength of 2 or more) even once, and it doesn’t come back for that flight even if the signal weakens again.

Fix: take off from an open area, away from tall buildings, large metal structures and trees, and wait on the ground until the drone has a strong signal and has recorded its Home Point.

Cause 3: your own max altitude setting

With a strong GNSS signal, DJI says the drone can’t go higher than the max altitude or further than the max distance you’ve set in DJI Fly. The prompts are “Max flight altitude reached” and “Max flight distance reached”. DJI’s manual puts both settings in DJI Fly under Safety > Flight Protection.

If you’ve previously set a low limit, or a firmware update has changed things, check the values there.

Cause 4: a GEO zone

DJI’s GEO system shows restricted areas live in DJI Fly, and these include Altitude Zones with lower height limits, often near airports. If the drone stops climbing well below your own limit and DJI Fly shows a GEO zone on the map, that’s the reason. You can check zones on DJI’s Fly Safe website before you go.

A DJI GEO zone isn’t the same as UK law. The legal rules on where you can fly come from the CAA, so check our where can I fly my drone in the UK? guide too.

Don’t forget the UK limit

In the UK Open Category, the CAA’s Drone and Model Aircraft Code says your drone must never be more than 120 m (400 ft) from the closest point of the Earth’s surface. Whatever you set in DJI Fly, that’s the legal ceiling for most flying. Our UK drone laws 2026 guide has the detail.

Frequently asked questions

Why can my Mini 4 Pro only fly 30 m high?

Either you’re not logged in to DJI Fly (30 m height and 50 m range), the GNSS signal is weak (30 m from takeoff, or 2 m in some low-light conditions), or you’ve set a low max altitude.

How do I remove the 30 m limit on the Mini 4 Pro?

Log in to DJI Fly and take off with a strong GNSS signal. DJI says the weak-signal limit clears itself once the signal becomes strong.

Why can my drone only go 50 m away?

DJI limits range to 50 m when you’re not logged in to the app.

How high can I legally fly a Mini 4 Pro in the UK?

In the Open Category, the CAA’s limit is 120 m (400 ft) from the closest point of the Earth’s surface.

Still stuck?

Sources (checked 18 October 2026)

  • DJI Mini 4 Pro User Manual (EN): DJI Fly login note, GEO System, GEO Zones, Flight Limits (Strong and Weak GNSS Signal tables), DJI Fly Settings (Safety > Flight Protection, account login). dji.com/uk/mini-4-pro/downloads
  • DJI Fly Safe GEO zone map: fly-safe.dji.com
  • CAA, The Drone and Model Aircraft Code, Where you can fly (points 3 to 9): caa.co.uk drone code