DJI Matrice 4T and 4E firmware update failed in DJI Pilot 2? How to fix it

Image: Tom Fisk / Pexels A firmware update on a DJI Matrice 4T or 4E has stalled or failed in DJI Pilot 2, and now the controller’s status LED is solid yellow or the aircraft won’t finish updating. When the aircraft is part of a working job, that’s the last thing you need. DJI’s own…

Aerial view of an industrial plant taken from a drone

Image: Tom Fisk / Pexels

A firmware update on a DJI Matrice 4T or 4E has stalled or failed in DJI Pilot 2, and now the controller’s status LED is solid yellow or the aircraft won’t finish updating. When the aircraft is part of a working job, that’s the last thing you need.

DJI’s own manual, release notes and known issues list cover the usual causes. Here’s how to get the update through.

Last checked: 19 October 2026, against the DJI Matrice 4 Series User Manual, release notes (latest 10 July 2026) and DJI’s Matrice 4 Series known issues list.

Quick answer

Charge the batteries above 20% (DJI says fully charge before updating), link the aircraft to the controller, connect the controller to the internet and keep the aircraft within 200 m of the controller. In DJI Pilot 2, tap Update All. If it fails, restart the aircraft, the controller and DJI Pilot 2, then try again, or use Offline Update or DJI Assistant 2 (Enterprise Series).

What a failed update looks like

DJI’s manual says the controller’s status LED shows solid yellow when a firmware update has failed. During a normal update, DJI says it’s also normal for the gimbal to go limp, the aircraft lights to blink and the aircraft to reboot, so don’t mistake that for a failure.

Check the latest versions

DJI’s latest Matrice 4 Series release notes (10 July 2026) list:

ComponentVersion (DJI release notes, 2026.07.10)
Aircraft firmwarev17.02.05.01
Remote controller firmwarev01.64.08.20
DJI Pilot 2 appv17.2.5.28
DJI Assistant 2v2.1.20

Fix 1: charge everything first

DJI’s release notes and manual both say to make sure the aircraft and controller are fully charged before updating.

New batteries catch people out. DJI’s known issues list says batteries arrive below 20%, because aviation transport rules require them to be shipped at no more than 30%. DJI recommends charging them in the charging hub to above 20% before you update.

Fix 2: stay within 200 m

DJI’s known issues list says that if the distance between the controller and the aircraft is more than 200 m, a firmware update will fail. Keep them close together while you update.

Fix 3: update with DJI Pilot 2 the right way

From DJI’s manual:

  1. Power on the aircraft and controller. Make sure the aircraft is linked to the controller and the controller is connected to the internet.
  2. Open DJI Pilot 2. A prompt appears on the home screen when new firmware is available. Tap it to open the Firmware Update view.
  3. Tap Update All. DJI Pilot 2 downloads the firmware and updates the aircraft and controller.
  4. Both restart automatically when the update is finished.

DJI says the devices fitted to the aircraft are updated too. Don’t remove accessories or turn anything off during the update.

Fix 4: restart and retry

DJI’s release notes say that if an update fails, restart the aircraft, the controller and DJI Pilot 2 or DJI Assistant 2, and try again.

Fix 5: use Offline Update

If the internet connection is the problem, DJI’s manual describes an offline route:

  1. Download the offline firmware package from DJI’s website to a microSD card or USB drive.
  2. In DJI Pilot 2, tap HMS, then Firmware Update > Offline Update.
  3. Pick the package for the controller, aircraft or payload and tap Update All.

Fix 6: use DJI Assistant 2 (Enterprise Series)

You can also update from a computer. DJI’s manual says:

  1. Connect the aircraft or the controller to the computer. DJI Assistant 2 can’t update more than one device at once, so do them separately.
  2. Make sure the computer is online and the device is powered on.
  3. Open DJI Assistant 2, log in with your DJI account and choose firmware update.
  4. Select the version and click to update. The device restarts when you see “Update successful”.

Don’t forget the batteries

DJI’s manual says the battery firmware is included in the aircraft firmware, so you need to update every battery. Put each one in the aircraft and update it.

Still failing?

If it still won’t update after a restart and a retry, DJI’s manual says to contact DJI Support. You’ll find the release notes, firmware packages and DJI Assistant 2 on DJI Enterprise’s Matrice 4 Series downloads page.

UK rules for the Matrice 4 Series

DJI’s manual says the Matrice 4T and 4E are C2 (EU) class, with a maximum take-off mass of 1430 g. Anything this heavy with a camera needs a Flyer ID and an Operator ID from the CAA. See our Flyer ID vs Operator ID guide.

The Drone Code’s 50 m and 150 m distance rules apply unless you have the right authorisation to fly outside the Code. Check the CAA’s guidance for the kind of work you’re doing before you fly.

Frequently asked questions

Why does my Matrice 4T firmware update keep failing?
The usual causes are low batteries, the aircraft being more than 200 m from the controller, or a device being turned off mid-update. Charge above 20%, keep them close and try again.

What does a solid yellow light on the Matrice 4 controller mean?
DJI says it means a firmware update has failed. Restart everything and try again.

Can I update a Matrice 4E without internet?
Yes. Download the offline package to a microSD card or USB drive, then use HMS > Firmware Update > Offline Update in DJI Pilot 2.

Can DJI Assistant 2 update the aircraft and controller together?
No. DJI says it can’t update more than one device at a time.

Do I need to update the Matrice 4 batteries?
Yes. DJI says battery firmware is part of the aircraft firmware, so update every battery.

Keep reading

This guide is general information based on DJI’s published instructions, not legal advice.

Sources (checked 19 October 2026)