Image: Castorly Stock / Pexels
Your Autel EVO Lite+ firmware update stalls, fails, or finishes and leaves the drone refusing to take off. Autel’s own release notes and FAQ explain most of the causes, and the biggest one catches lots of owners out: the order you update things in.
Here’s how to get the update through, step by step.
Last checked: 19 October 2026, against Autel’s EVO Lite series V2.0.19 release notes, the EVO Lite FAQ and the EVO Lite series product page.
Quick answer
Update the Autel Sky app first, then the drone. Make sure the drone battery and the controller are both at 30% or more, keep the network connected while the firmware downloads, and don’t power anything off during the update. When it’s done, restart the drone and the controller. If it won’t take off afterwards, check your app and firmware versions match Autel’s version table.
From Autel’s V2.0.19 release notes and EVO Lite FAQ.
Know what the latest firmware is
Autel’s release notes say its latest EVO Lite series firmware package is V2.0.19, released on 2 December 2024. The release notes cover the whole EVO Lite series, which includes the EVO Lite+. Autel warns:
- after updating to V2.0.19, you can’t downgrade to an older version,
- the drone may not take off if the app and firmware versions don’t match its version table,
- you need to update the Autel Sky app first, before the over-the-air firmware update.
Step 1: update Autel Sky first
Autel’s EVO Lite FAQ says the app prompts you when a new version is available after you connect to the drone. Follow that prompt and update the app before you touch the firmware. The version table in Autel’s V2.0.19 release notes lists Autel Sky 1.4.113 (Android) and 1.7.36 (iOS) for V2.0.19.
Step 2: charge everything to 30% or more
Autel’s EVO Lite FAQ says to make sure the remaining power of the battery and the remote controller is 30% or more before you start.
Step 3: run the update in Autel Sky
From Autel’s EVO Lite FAQ:
- Connect the drone to Autel Sky.
- When the app finds new firmware, it shows a prompt to download and install it.
- Follow the instructions in the app. You can watch the progress on screen.
- Restart the drone and the controller when the update is complete.
Why updates fail
Autel’s EVO Lite FAQ lists three causes:
| Cause | What to do |
|---|---|
| A device turned off during the update | Keep the drone and controller on until it’s finished |
| The connection dropped while the firmware was downloading | Stay on a stable network until the download is complete |
| Battery or controller below 30% | Charge both before you start |
The same FAQ says that once the firmware download is complete, you can disconnect from the network and the update carries on.
Drone won’t take off after updating?
Autel’s V2.0.19 release notes say a mismatch between app and firmware versions can stop the drone taking off. Check what’s installed against the version table in those notes:
| Component | V2.0.19 version (Autel) |
|---|---|
| Autel Sky app (Android / iOS) | 1.4.113 / 1.7.36 |
| Flight control | 4.0.25.18 / 3.0.25.18 / 1.0.25.18 |
| Camera | V2.1.8.35 |
| Image transmission | V1.0.7.30 |
| Remote control | V2.0.0.11 / V1.0.4.8 |
| Battery | V0.1.6.0 |
| Gimbal | V1.0.0.73 |
The release notes say the flight control, remote control and GPS firmware come in different versions, and all of the listed versions are safe to fly.
The V2.0.19 notes also say that, for EU C-marking compliance, the drone can’t take off before it connects to Autel Sky, and ATTI mode is removed in the EU region. If your drone won’t take off, make sure the app is open and connected.
Still failing?
If the update still won’t go through, stop and contact Autel through its support pages. Don’t fly on half-updated firmware.
UK rules for the EVO Lite+
Autel’s EVO Lite series product page lists an 835 g take-off weight. It has a camera and weighs over 250 g, so the CAA requires a Flyer ID to fly it and an Operator ID for the person responsible for it. See our Flyer ID vs Operator ID guide.
At this weight, the Drone Code’s 50 m distance from uninvolved people and 150 m distance from residential, recreational, commercial and industrial areas apply. See where can I fly my drone in the UK? and our Remote ID explainer.
Frequently asked questions
How do I update the firmware on an Autel EVO Lite+?
Update the Autel Sky app first (release notes), then connect to the drone and follow the app’s firmware prompt. Autel’s FAQ says to restart the drone and controller when it’s done.
Why does my EVO Lite+ firmware update keep failing?
Autel’s EVO Lite FAQ says updates fail if a device is turned off, the download is interrupted, or the battery or controller is below 30%.
Can I downgrade EVO Lite+ firmware?
Not after V2.0.19. Autel’s release notes say downgrading is no longer supported once you’ve updated to it.
Why won’t my EVO Lite+ take off after a firmware update?
Autel’s release notes say it may not take off if the app and firmware versions don’t match. Update Autel Sky and check the version table.
Do I need to register an Autel EVO Lite+?
Yes. At 835 g with a camera, you need a Flyer ID and an Operator ID.
Keep reading
- Autel EVO Lite+ help hub
- Flyer ID vs Operator ID
- Where can I fly my drone in the UK?
- All help and fixes
This guide is general information based on Autel’s published instructions, not legal advice.
Sources (checked 19 October 2026)
- Autel, EVO Lite series V2.0.19 release notes: release date, no downgrade, version mismatch, update the app first, version table, EU changes. autelrobotics.com release notes
- Autel, EVO Lite FAQ: upgrade failures, 30% battery, upgrade steps, restart. autelrobotics.com EVO Lite FAQ
- Autel, EVO Lite series product page: 835 g take-off weight. autelrobotics.com EVO Lite series
- CAA, Registering to fly drones and model aircraft. caa.co.uk registering
- CAA, Drone Code, Where you can fly (points 3 to 9). caa.co.uk Drone Code



