Image: Borys Zaitsev / Pexels
Your Potensic ATOM SE powers on, but the controller won’t talk to it: no live video in the app, a solid blue light on the drone, or a pairing attempt that never finishes. Usually it’s one of a few simple things, and Potensic’s own manual covers every one.
Work through the fixes below in order.
Last checked: 19 October 2026, against the Potensic ATOM SE User Manual (V08, November 2025), Potensic’s ATOM SE spec page and Potensic’s troubleshooting page.
Quick answer
In the PotensicPro app, tap Settings > Re-pair the drone. Then long-press the drone’s power button until its indicators flash green quickly. Keep the controller within 1 m and don’t move either one. After about 7 seconds the controller beeps once and live video appears.
First, read the lights
Potensic’s manual explains what the drone’s status indicator means:
| Drone indicator | What it means |
|---|---|
| Solid blue | The controller has no connection with the drone |
| Flashes quickly green | Frequency pairing mode |
| Flashes quickly blue | Upgrade mode |
| Flashes quickly red | Low battery |
| Solid red | Sensor error |
The controller has four white LEDs. Potensic says they flash slowly at the same time in pairing mode and turn on one after another in upgrade mode.
Fix 1: charge and power on properly
Potensic says the battery goes into hibernation to protect itself and recommends charging it. A flat or sleeping battery is the first thing to rule out.
- Drone: with the battery fitted, short-press then long-press the power button until all the indicators light, then let go.
- Controller: long-press the power button until all the indicators light, then let go.
For charging, Potensic says to use the original cable or one that supports 3A or more, or charging can fail.
Fix 2: get the phone connected to the controller
The app needs a working link to the controller before it can do anything. Potensic’s troubleshooting page says that if an Android phone doesn’t respond when you plug in the cable:
- check the controller is switched on normally and not in calibration or upgrade mode,
- check the cable is undamaged and plugged in the right way,
- if the USB options pop-up appears, choose Data Transfer.
Potensic’s manual says you need an internet connection the first time, to register and log in to PotensicPro.
Fix 3: re-pair the drone and controller
Potensic says the ATOM SE and its controller are paired before they leave the factory. You need to pair them again when you use a new controller or a new drone for the first time, and it’s the standard fix when they won’t connect.
How to re-pair, from Potensic’s manual:
- Turn on the controller, connect your phone and open PotensicPro.
- Tap Settings and choose Re-pair the drone.
- Turn on the drone, then long-press its power button until the indicators flash green.
- Wait about 7 seconds. The controller beeps once and the app shows live video.
Fix 4: if pairing fails, clear the area
Potensic says pairing can fail because of nearby interference, another drone pairing at the same time, or a controller that’s too far away or blocked. While you pair:
- keep the controller within 1 m of the drone,
- move away from other 2.4 GHz sources,
- don’t move or use the drone or the controller.
Then try again.
Fix 5: finish or retry any update
If the drone’s light flashes quickly blue, or the controller’s LEDs light up one after another, it’s in upgrade mode. Let the update finish. Potensic’s manual says that if an update fails, you should restart all the devices and try again, then contact Potensic if it keeps failing.
Still not pairing?
If the drone still shows solid blue after a careful re-pair, or the light is solid red (sensor error), stop and contact Potensic at support@potensic.com with your order ID, as its manual asks. Manuals and the app are on Potensic’s downloads page.
UK rules for the ATOM SE
Potensic’s spec page lists the ATOM SE at under 249 g and C0 (EU). It has a camera and weighs over 100 g, so the CAA requires a Flyer ID to fly it and an Operator ID for the person responsible for it. See our Flyer ID vs Operator ID guide.
Potensic says users under 16 shouldn’t handle the drone alone and should be supervised by an adult.
Frequently asked questions
How do I re-pair a Potensic ATOM SE?
In PotensicPro, tap Settings > Re-pair the drone, then hold the drone’s power button until it flashes green. Keep the controller within 1 m. It beeps once after about 7 seconds when it works.
Why is my ATOM SE showing a solid blue light?
Potensic says solid blue means the controller has no connection with the drone. Check the controller is on, then re-pair.
Why won’t my Android phone connect to the controller?
Choose Data Transfer from the USB options when you plug in, and check the cable and its direction.
Do I need to register a Potensic ATOM SE?
Yes. It has a camera and weighs over 100 g, so you need a Flyer ID and an Operator ID.
Keep reading
- Potensic ATOM SE help hub
- Potensic ATOM 3 not connecting to controller?
- Potensic ATOM 2 GPS not working?
- Best drone under 250g UK
- All help and fixes
This guide is general information based on Potensic’s published instructions, not legal advice.
Sources (checked 19 October 2026)
- Potensic ATOM SE User Manual V08 (EN, November 2025): status indicators, controller LEDs, startup, battery hibernation, charging cable, registration, frequency pairing, troubleshooting, C0, age guidance. potensic.com downloads
- Potensic ATOM SE specs: takeoff weight, C0 (EU), PixSync 2.0. potensic.com ATOM SE specs
- Potensic support troubleshooting (Android USB connection). store.potensic.com troubleshooting
- CAA, Registering to fly drones and model aircraft. caa.co.uk registering



