Potensic ATOM 2 GPS not working? How to fix it

Image: cottonbro studio / Pexels Your Potensic ATOM 2 won’t hold its position, Return to Home is greyed out, or the app keeps warning about a weak signal. Almost every time, the cause is where you’re powering it on, a compass that needs calibrating, or not waiting long enough before take-off. Work through the fixes…

A small drone flying against a mountain backdrop

Image: cottonbro studio / Pexels

Your Potensic ATOM 2 won’t hold its position, Return to Home is greyed out, or the app keeps warning about a weak signal. Almost every time, the cause is where you’re powering it on, a compass that needs calibrating, or not waiting long enough before take-off.

Work through the fixes below in order. Every step comes from Potensic’s own ATOM 2 user manual.

Last checked: 19 October 2026, against the Potensic ATOM 2 User Manual (V07, November 2025) and Potensic’s ATOM 2 spec page.

Quick answer

Power the ATOM 2 on in an open, flat space away from buildings, trees and metal. Wait until the tail light flashes slowly green (GNSS positioning) and you hear “HOME point updated” before you take off. If it still won’t lock on, or the app asks for it, calibrate the compass away from cars and steel structures.

How the ATOM 2 finds its position

Potensic’s spec page says the ATOM 2 uses GPS, GLONASS, Galileo and BeiDou. The manual describes three ways it can hold position, and it switches between them automatically:

ModeWhen it’s usedTail light
GNSS positioningGood satellite signal. Precise hovering, smart flight and auto returnFlashes slowly green
Vision positioning (OPTI)Weak GNSS, but low altitude, good light and a textured surfaceFlashes slowly cyan
Attitude mode (ATTI)Weak GNSS and the vision system can’t helpFlashes slowly blue

If the tail light is flashing blue, the drone can’t hold a stable hover. Potensic says to fly it back manually and land somewhere safe as soon as possible.

Fix 1: power on in the open and wait

Potensic’s pre-flight checklist says to power on the drone on an open, flat surface and wait for it to enter GNSS mode before taking off. Its flight environment rules add:

  • choose an open area free of tall buildings. Structures with a lot of steel can interfere with the compass and block GNSS signals,
  • stay away from high-voltage power lines, communication base stations and transmission towers,
  • keep the drone in sight, so mountains or trees don’t block the signal.

Wait for the voice prompt “HOME point updated” before you carry on.

Fix 2: check the GNSS status in Potensic Eve

Potensic’s manual says the GNSS Status icon in the flight view shows the signal strength and the number of connected satellites. Tap it to see more detail, including the positioning accuracy.

If the number stays low, move somewhere more open and give it time. Don’t take off until the drone is in GNSS mode.

Fix 3: calibrate the compass

A compass that needs calibrating can stop the drone positioning properly. Potensic says calibration is needed:

  • the first time you use the drone,
  • when you fly more than 500 km from where you last calibrated.

The Potensic Eve app pops up the calibration screen when it’s needed. You can also start it yourself in Settings > Calibration > Compass Calibration.

How to calibrate, from Potensic’s manual:

  1. Tap Start Calibration. The drone’s status light alternately flashes red and green.
  2. Hold the drone horizontally and rotate it 360° until the app shows the vertical step. The light alternately flashes blue and green.
  3. Hold the drone vertically and rotate it 360° around a vertical axis until the app says calibration is complete.

Before you start, Potensic says:

  • don’t calibrate near large metal structures, such as car parks, steel-reinforced basements, bridges, cars or scaffolding,
  • don’t carry anything with ferromagnetic materials, such as your phone, near the drone,
  • hold the drone at least 1.5 m above the ground,
  • don’t calibrate with the arms folded.

If the app keeps saying “Calibration failed”, move somewhere else and try again. You don’t need to calibrate the compass to fly indoors.

Fix 4: know what doesn’t work without GNSS

Potensic’s manual says that with a weak or no GNSS signal, you can’t use Return to Home, and features like AI Track and AI QuickShots won’t work. In vision positioning (OPTI mode), the Intelligent Flight Modes are unavailable and the maximum height is 5 m.

So if RTH or tracking is greyed out, it’s usually a GNSS problem, not a fault.

Fix 5: watch the Home Point if you took off without GNSS

Potensic says that if the drone takes off in OPTI mode and then switches to GNSS mode, the Home Point might not be your take-off point. Return to Home could head somewhere unexpected. This is one more reason to wait for GNSS mode and the “HOME point updated” prompt before take-off.

Fix 6: update everything and restart

Potensic’s checklist says to make sure all firmware is up to date before flying. If a firmware update fails, Potensic says to restart all the devices and try again, and to contact Potensic support if the problem continues.

Still not working?

If the drone won’t enter GNSS mode in a genuinely open space after a compass calibration, or the app reports a sensor error (Potensic says a solid red tail light means sensor error), stop flying and contact Potensic through its downloads and support pages.

UK rules for the ATOM 2

Potensic lists the ATOM 2 at 245 g and C0 (EU). It has a camera and weighs over 100 g, so the CAA requires a Flyer ID to fly it and an Operator ID for the person responsible for it. Our Flyer ID vs Operator ID guide explains both.

Because it’s under 250 g, the CAA’s Drone Code lets you fly closer than 50 m to uninvolved people and over them, but never over crowds. Potensic says the ATOM 2 is only suitable for ages 16 and up. See where can I fly my drone in the UK? for the restrictions.

Frequently asked questions

Why won’t my Potensic ATOM 2 get GPS?
Usually it’s the location. Power on in an open area away from tall buildings, trees, power lines and metal, and wait for GNSS mode. If the app asks, calibrate the compass.

What does the blue flashing light mean on the ATOM 2?
Potensic says a slowly flashing blue tail light means Attitude mode (ATTI). The drone can’t hold a stable hover, so land it safely as soon as you can.

How do I calibrate the ATOM 2 compass?
In Potensic Eve, go to Settings > Calibration > Compass Calibration. Rotate the drone 360° horizontally, then 360° vertically, at least 1.5 m above the ground and away from metal.

Why is Return to Home unavailable?
Potensic says RTH needs GNSS. With a weak or no GNSS signal, RTH, AI Track and AI QuickShots won’t work.

Do I need to register a Potensic ATOM 2 in the UK?
Yes. At 245 g with a camera, you need a Flyer ID and an Operator ID.

Keep reading

This guide is general information based on Potensic’s published instructions, not legal advice.

Sources (checked 19 October 2026)

  • Potensic ATOM 2 User Manual V07 (EN, November 2025): positioning modes, tail indicator, GNSS status, flight environment, pre-flight checklist, compass calibration, Home Point, troubleshooting, C0, 245 g, age 16+. potensic.com downloads
  • Potensic ATOM 2 specs: GPS, GLONASS, Galileo and BeiDou; C0 (EU). potensic.com ATOM 2 specs
  • CAA, Registering to fly drones and model aircraft. caa.co.uk registering
  • CAA, Drone Code, Where you can fly (points 3 to 9). caa.co.uk Drone Code