HOVERAir X1 Pro and ProMax not connecting to your phone? How to fix it

Image: Juan Montes / Pexels This article contains affiliate links, marked (Ad). If you sign up or buy through one, we earn a commission. It doesn’t cost you anything extra and doesn’t change what we include. As an Amazon Associate, Drones Unplugged earns from qualifying purchases. How we make money. The HOVERAir X1 PRO and…

A small white drone held on an open palm by the sea

Image: Juan Montes / Pexels

This article contains affiliate links, marked (Ad). If you sign up or buy through one, we earn a commission. It doesn’t cost you anything extra and doesn’t change what we include. As an Amazon Associate, Drones Unplugged earns from qualifying purchases. How we make money.

The HOVERAir X1 PRO and PROMAX are built to fly with no controller at all, but you still need the Hover X1 app to activate them, change settings and get your videos off. When the app won’t connect, it helps to know that the camera talks to your phone in two different ways:

  • Bluetooth for pairing, activation and settings,
  • Wi-Fi from the camera itself for Smart Preview, the Hover album and downloads.

They go wrong for different reasons, so work out which one is failing first.

Last checked: 19 October 2026, against HOVERAir’s X1 PRO and PROMAX quick start guide, its Getting Started guide and its Wi-Fi connection troubleshooting article.

Quick answer

Can’t find the camera in the app? Turn on Bluetooth and location permissions for the Hover X1 app, then press and hold both select buttons together until the status light turns blue. That’s Bluetooth pairing mode. Connected but can’t preview or download? Turn off Smart Network Switch or Smart Wi-Fi on your phone, because the camera’s Wi-Fi has no internet and your phone may drop it.

Part 1: the app can’t find the camera (Bluetooth)

Fix 1: charge it to activate it

HOVERAir’s quick start guide says to charge the battery first to activate it. The screen shows a charging animation while it charges. It’s fully charged when the screen shows 100% or switches off completely.

Fix 2: give the app the right permissions

HOVERAir says to enable location and Bluetooth permissions for the Hover X1 app, otherwise it can’t connect. Check them in your phone’s settings, not just inside the app.

Fix 3: connect the way HOVERAir describes

  1. Press and hold the camera’s power button until it switches on. HOVERAir’s Getting Started guide says about 3 seconds, until the green light comes on.
  2. Open the Hover X1 app.
  3. Tap into the Hover page and follow the prompts to enable Bluetooth.
  4. Tap Hover to search for nearby HOVERAir devices, then select yours.
  5. First time? Tap the green Activate button to finish activation.

Fix 4: put it into Bluetooth pairing mode

If the camera still doesn’t appear, HOVERAir’s quick start guide says to press and hold both select buttons at the same time until the status light turns blue. That means it’s in Bluetooth pairing mode, ready to connect to your phone. Then search again from the Hover page.

Part 2: connected, but no preview or downloads (Wi-Fi)

To preview or download footage, your phone joins a Wi-Fi network broadcast by the camera. HOVERAir says you don’t need a password when you connect through the app. These are HOVERAir’s own fixes, in order.

Fix 5: check your phone can see the camera’s Wi-Fi

Look in your phone’s Wi-Fi list for a network whose name starts with “Hover”. If it isn’t there, HOVERAir says the camera’s signal may be on the 5 GHz band while your phone only supports 2.4 GHz. Try another phone. If no phone can see it, HOVERAir says the camera may need checking.

Fix 6: restart both and forget the network

Turn off and restart both the camera and your phone. Then forget the Hover Wi-Fi network on your phone and reconnect.

Fix 7: join the network manually

Instead of connecting through the app, you can join the camera’s Wi-Fi from your phone’s settings. HOVERAir publishes the password in its Wi-Fi troubleshooting article. If manual connection works but the app doesn’t, HOVERAir says it may be a compatibility issue with your phone, so update the Hover X1 app to the latest version.

Fix 8: turn off Smart Network Switch or Smart Wi-Fi

This is the big one. HOVERAir explains that the camera’s Wi-Fi doesn’t connect to the internet. Some phones notice, drop the Wi-Fi and switch to mobile data, which stops videos and photos transferring. Turn off Smart Network Switch or Smart Wi-Fi (the name depends on your phone).

Fix 9: turn off Dual-WLAN Acceleration (some Android phones)

HOVERAir says some phones, such as OPPO and Xiaomi models, have Dual-WLAN Acceleration on, which can interfere. The path is usually Settings > WLAN > WLAN Assistant > Dual-WLAN Acceleration, but it varies.

Fix 10: set a static IP

If you’re connected but still nothing works, HOVERAir suggests setting a static IP on your phone. After joining the Hover Wi-Fi, open your Wi-Fi settings, tap the connected network and choose Static IP.

Fix 11: give the app full album access

When the Hover app asks for access to your photo album, HOVERAir says to grant full access. With only partial access, videos and photos may not save.

A short, jumpy preview in the Hover album is normal, HOVERAir says. Tap the video file to watch it in full.

Other ways to get your footage off

If the app still won’t play ball, HOVERAir lists two alternatives:

  • connect the camera to a computer with a USB-C data cable while it’s on, and download the videos directly,
  • take out the SD card and copy the files.

HOVERAir notes that sound recorded through the app is only included when you export through the X1 app.

Keep the firmware up to date

HOVERAir recommends keeping your phone’s operating system, the Hover X1 app and the camera’s firmware up to date. To update the camera, power it on, open the app and tap Update. Keep the camera switched on until the update finishes and it restarts by itself.

If an update fails and the camera stops responding, HOVERAir has a recovery tool called FlyKit. Email HOVERAir’s support team at support@hoverair.com with your model, a short description of the problem and whether you use Windows or Mac.

UK rules for the HOVERAir X1 PRO

HOVERAir’s quick start guide lists a takeoff weight of 192 g. That’s over 100 g, and it has a camera, so you need a Flyer ID to fly it and an Operator ID for the person responsible for it. Our Flyer ID vs Operator ID guide explains both. HOVERAir also says the X1 PRO and PROMAX aren’t waterproof.

Thinking of upgrading? Search Amazon for the HOVERAir X1 PRO (Ad).

Frequently asked questions

Why won’t my HOVERAir X1 PRO show up in the app?
Check the app has Bluetooth and location permissions, then press and hold both select buttons until the status light turns blue to enter Bluetooth pairing mode.

Why can’t I download videos from my HOVERAir?
Downloads use the camera’s own Wi-Fi, which has no internet. Turn off Smart Network Switch or Smart Wi-Fi on your phone so it doesn’t drop the connection.

What’s the HOVERAir Wi-Fi password?
HOVERAir says you don’t need one when connecting through the app. For manual connection, HOVERAir publishes it in its Wi-Fi troubleshooting article.

How do I update my HOVERAir X1 PRO?
Power it on, open the Hover X1 app and tap Update. Keep it switched on until it restarts.

Do I need to register a HOVERAir X1 PRO in the UK?
Yes. At 192 g with a camera, it needs a Flyer ID and an Operator ID.

Keep reading

This guide is general information based on HOVERAir’s published instructions, not legal advice. If nothing works, contact HOVERAir at support@hoverair.com.

Sources (checked 19 October 2026)