Image: Kaboompics.com / Pexels
Your DJI Mini 3 asked for a firmware update, you said yes, and it failed. Or it’s been sitting at the same percentage for ages. It’s annoying, but it’s rarely serious. DJI publishes the usual causes, and fixing them normally gets the update through on the next try.
Last checked: 19 October 2026, against the DJI Mini 3 User Manual (v1.2, January 2024), the Mini 3 release notes (28 May 2024) and DJI’s UK Mini 3 FAQ.
Quick fix
Charge the drone and the controller above 20%, connect to steady Wi-Fi and stay on the DJI Fly screen while the firmware downloads. If it fails, restart the drone, the controller and DJI Fly, and try again. If DJI Fly still won’t do it, update the drone and the controller separately with DJI Assistant 2 (Consumer Drones Series) on a computer.
Why Mini 3 updates fail
DJI’s UK FAQ lists four common causes:
- The drone or controller battery is below 20%.
- The drone or controller switched off during the update. DJI says to restart both and try again.
- The internet connection dropped while the firmware was downloading.
- Your phone switched to another app during the download.
Before you retry, fix whichever one applies: charge both devices, find a better connection, and leave DJI Fly open on screen.
Fix 1: restart and retry in DJI Fly
DJI’s release notes say that if an update fails, restart the drone, the remote controller, and DJI Fly (or DJI Assistant 2), then retry.
When you reconnect, DJI Fly prompts you if new firmware is available. Connect your controller or phone to the internet and follow the on-screen steps.
Fix 2: check the controller is linked
DJI’s manual says you can’t update the firmware if the remote controller isn’t linked to the drone. If you’ve swapped controllers or the link has dropped, relink first and then update.
The Mini 3 works with the DJI RC-N1 and the DJI RC, according to DJI’s FAQ.
Fix 3: give it time
DJI says the update takes about 10 minutes. During that time it’s normal for the gimbal to go limp, the status lights to blink and the drone to reboot. DJI’s FAQ adds that the drone restarts several times and powers off by itself when it’s done.
If you switch it off because it looks frozen, you’ll cause the very failure you’re trying to avoid.
Fix 4: update with DJI Assistant 2
If DJI Fly keeps failing, use DJI Assistant 2 (Consumer Drones Series) on a computer. It updates the drone and the controller separately.
To update the drone:
- Open DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account.
- Power on the Mini 3 and connect it to the computer with a USB-C cable within 20 seconds.
- Select DJI Mini 3 and click Firmware Updates.
- Select the firmware version.
- Wait for it to download. The update starts automatically.
- Wait for the update to finish.
To update the controller:
- Open DJI Assistant 2 and log in.
- Power on the controller and connect it to the computer with a USB-C cable.
- Select your controller and click Firmware Updates.
- Select the firmware version, then wait for it to download and install.
DJI’s tips for this method:
- Make sure both the drone and the controller have at least 20% power before you start.
- Keep the computer connected to the internet throughout.
- Don’t unplug the USB-C cable during an update.
- Follow every step, otherwise the update may fail.
Download DJI Assistant 2 from the Mini 3 downloads page. DJI listed version 2.1.42 there on 19 October 2026.
Fix 5: update the batteries too
DJI’s FAQ says the DJI Fly prompt updates the firmware of the drone, the controller, the battery and other modules. If you have spare batteries, put each one in and let DJI Fly check it, so they all match.
The current Mini 3 firmware
DJI’s latest Mini 3 release notes, dated 28 May 2024, list:
| Device | Firmware version |
|---|---|
| DJI Mini 3 | v01.00.0500 |
| DJI RC-N1 | v04.16.0500 |
| DJI RC | v01.03.1400 |
| DJI Fly app | v1.13.4 |
That release added support for the Remote ID requirements of some countries and regions. If your devices already show these versions or later, you don’t need to update.
UK rules reminder
DJI’s UK spec page lists the Mini 3 at 248 g and C0 (EU) with the standard battery, so it can fly in Over People (A1), never over crowds. DJI says the Battery Plus takes it to about 290 g, which is over the C0 limit. You need a Flyer ID and an Operator ID either way. Our Remote ID explainer explains when you’ll need Remote ID switched on.
Frequently asked questions
Why does my DJI Mini 3 firmware update keep failing?
DJI’s four usual causes are low battery (under 20%), the drone or controller powering off, a dropped internet connection and switching away from DJI Fly. Fix the cause, restart everything and retry.
How long does a DJI Mini 3 firmware update take?
About 10 minutes, according to DJI. The drone restarts several times and powers off when it’s finished.
Can I update a DJI Mini 3 on a computer?
Yes, with DJI Assistant 2 (Consumer Drones Series). Connect the drone by USB-C within 20 seconds of powering it on.
What is the latest DJI Mini 3 firmware?
DJI’s latest release notes (28 May 2024) list aircraft firmware v01.00.0500.
Do I need to update my spare batteries?
DJI says the update covers the battery too, so check each spare in DJI Fly.
Keep reading
- DJI Mini 3 help hub
- DJI Mini 4 Pro firmware update failed?
- DJI Mini 5 Pro firmware update failed?
- Flyer ID vs Operator ID
- All help and fixes
This guide is general information based on DJI’s published instructions. If updates still fail, contact DJI Support through DJI’s UK support page.
Sources (checked 19 October 2026)
- DJI Mini 3 User Manual v1.2 (EN, 2024.01): firmware update via DJI Fly and DJI Assistant 2, linked controller, 20% power, update time. dji.com/uk/mini-3/downloads
- DJI Mini 3 Release Notes (2024.05.28): firmware versions, Remote ID support, retry advice. dji.com/uk/mini-3/downloads
- DJI Mini 3 FAQ (UK): how to update, causes of update failure, restarts, compatible controllers. dji.com/uk/mini-3/faq
- DJI Mini 3 specs (UK): 248 g, C0 (EU), Battery Plus weight. dji.com/uk/mini-3/specs
- DJI Assistant 2 (Consumer Drones Series) release notes v2.1.42 (22 September 2026). dji.com/uk/mini-3/downloads



