Image: DARKMODE CINEMA / Pexels
This article contains affiliate links, marked (Ad). If you sign up or buy through one, we earn a commission. It doesn’t cost you anything extra and doesn’t change what we include. As an Amazon Associate, Drones Unplugged earns from qualifying purchases. How we make money.
You’ve charged everything, the goggles are on your head, and all you can see is a “no signal” screen. With the DJI Avata 360, a goggles link problem usually comes down to one of four things: the wrong combination of devices, a drone that hasn’t been activated, a link that needs redoing, or firmware that’s out of step.
Work through the fixes below in order. Every step comes from DJI’s own Avata 360 manual, release notes and UK FAQ.
Last checked: 19 October 2026, against the DJI Avata 360 User Manual (v1.0, March 2026), the Avata 360 release notes (23 April 2026) and DJI’s UK Avata 360 FAQ.
Quick answer
Check you’re using DJI Goggles 3 or Goggles N3 with an RC Motion 3 or FPV Remote Controller 3, because the goggles won’t work with a standard controller. Make sure the drone is activated in DJI Fly. Then relink: power everything on, keep it within 0.5 m, connect the goggles to your phone with a data cable and tap Connection Guide in DJI Fly. No phone to hand? Hold the drone’s power button until it beeps and its LEDs blink in sequence (about five seconds), then hold the goggles’ power button until they beep continuously (about three seconds).
Fix 1: check you’ve got a combination that works
This catches a lot of people out. DJI’s UK FAQ splits the Avata 360’s controllers into two groups:
- Standard controllers: DJI RC 2, DJI RC-N2 and DJI RC-N3. These fly the drone with a screen or your phone, not goggles.
- Goggles controllers: the DJI RC Motion 3 and the DJI FPV Remote Controller 3. Both need DJI Goggles 3 or DJI Goggles N3.
It works the other way too. DJI says Goggles 3 and Goggles N3 must be used with the RC Motion 3 or the FPV Remote Controller 3. If you’re trying to pair goggles with an RC-N3, that’s why nothing happens.
Fix 2: make sure the drone is activated
DJI’s manual says the Avata 360 needs activating before first use, and activation needs an internet connection. To activate with goggles:
- Power on the drone, the goggles and the motion controller.
- Connect the goggles’ USB-C port to your phone with a data cable.
- Run DJI Fly and follow the prompts.
If your phone won’t connect to the goggles, DJI says to follow the prompts shown in the goggles instead.
Fix 3: if the goggles and phone won’t talk to each other
When the goggles are plugged into your phone and nothing responds, DJI’s manual suggests two checks:
- In the goggles menu, go to Settings > About and turn on OTG Wired Connection mode.
- If that doesn’t help, try a different cable. Some USB-C leads only charge and don’t carry data.
Fix 4: check which drone the goggles are looking for
Open the goggles menu and look at Status. DJI’s manual says to check the aircraft model shown there. If it isn’t the Avata 360, use Switch to change it before you try to link.
Fix 5: relink the goggles
DJI’s manual says a remote controller bought in a combo comes already linked to the aircraft. It doesn’t say the same about the goggles, so if the goggles won’t connect, or you’ve replaced something or the link has dropped, relink them. Before you start, DJI says to:
- power on the drone, goggles and controller,
- keep them all within 0.5 m of each other,
- make sure everything has the latest firmware and enough battery.
Option A: through DJI Fly (DJI’s recommended method). Keep the goggles connected to your phone, open DJI Fly, tap Connection Guide and follow the on-screen steps.
Option B: with the buttons.
- Press and hold the drone’s power button until it beeps and the battery LEDs blink in sequence. That takes about five seconds.
- Press and hold the goggles’ power button until they beep continuously and the power button blinks yellow. That takes about three seconds.
- When linking works, the drone’s battery LEDs go solid and show the battery level, the goggles stop beeping, and the live view appears.
Fix 6: link the motion controller or FPV controller to the goggles
The goggles also need to be linked to your controller. With the button method, DJI’s order is:
- Hold the goggles’ power button until they beep continuously and the button blinks yellow (about three seconds).
- Hold the controller’s power button until it beeps continuously and its battery LEDs blink in sequence (about five seconds).
- When both stop beeping and show their battery level, they’re linked.
DJI also says only one remote control device can control the drone at a time. If you’ve got a second controller switched on nearby, turn it off before you link.
Fix 7: the “Connected device not bound to aircraft” message
The Avata 360 uses one-to-one binding. DJI’s UK FAQ says that if you connect a different controller or pair of goggles, DJI Fly shows Connected device not bound to aircraft. Follow the prompt to rebind. DJI says that if you don’t, you’re limited to 20 flights with the new device.
Fix 8: update the firmware on everything
Mismatched firmware is a common cause of link trouble. DJI’s latest Avata 360 release notes (23 April 2026) list these versions:
| Device | Firmware version |
|---|---|
| DJI Avata 360 | v01.00.0200 |
| DJI Goggles N3 | v01.00.0900 |
| DJI Goggles 3 | v01.00.1300 |
| DJI RC Motion 3 | v01.00.0200 |
| DJI FPV Remote Controller 3 | v01.00.0300 |
| DJI Fly app | v1.21.0 |
To update with goggles, DJI’s manual says to power on and link every device, connect the goggles’ USB-C port to your phone, run DJI Fly and follow the prompts. You’ll need internet access. DJI Assistant 2 (Consumer Drones Series) on a computer is the alternative.
Three things from DJI to know:
- A controller that isn’t linked to the drone can’t be updated, so link first (Fix 5).
- Restart every device after an update.
- An update may reset your RTH Altitude and Max Distance, so check them before your next flight.
If an update fails, DJI says to restart everything and try again.
Fix 9: dropping out once you’re flying?
The manual says the goggles and controller warn you if they lose the drone, and the controller’s indicator glows red. DJI advises keeping clear of other wireless kit and turning off Wi-Fi on nearby phones. If there’s interference, land as soon as you can.
Before you fly with goggles in the UK
Goggles don’t count as keeping your drone in sight. Under UK rules you need to keep visual line of sight, so when you’re wearing goggles you need someone next to you watching the drone directly. The Avata 360 weighs about 455 g at takeoff, so you’ll need a Flyer ID and an Operator ID. Our DJI Avata 2 UK rules guide explains how flying with goggles works under CAA rules, and the same principles apply here.
Looking at an Avata 360 or a spare battery? Search Amazon for the DJI Avata 360 (Ad).
Frequently asked questions
Can I use DJI Goggles 3 with the RC-N3 on the Avata 360?
No. DJI says Goggles 3 and Goggles N3 must be used with the RC Motion 3 or the FPV Remote Controller 3.
How do I relink DJI goggles to the Avata 360?
Connect the goggles to your phone and tap Connection Guide in DJI Fly. Or hold the drone’s power button for about five seconds, then the goggles’ power button for about three seconds, with everything within 0.5 m.
Why does DJI Fly say “Connected device not bound to aircraft”?
The Avata 360 binds one to one. A new controller or new goggles need rebinding, otherwise DJI limits you to 20 flights with that device.
Does the Avata 360 need internet to activate?
Yes. DJI’s manual says activation needs an internet connection through DJI Fly.
Do I need a spotter when flying the Avata 360 with goggles?
Yes. Goggles don’t satisfy visual line of sight, so a spotter needs to keep the drone in direct view.
Keep reading
- DJI Avata 360 help hub
- DJI Avata 2 UK rules
- Remote ID in the UK, explained
- Flyer ID vs Operator ID
- All help and fixes
This guide is general information based on DJI’s published instructions, not legal advice. If you’re unsure, contact DJI Support through DJI’s UK support page.
Sources (checked 19 October 2026)
- DJI Avata 360 User Manual v1.0 (EN, 2026.03): activation, OTG Wired Connection, linking via DJI Fly and via buttons, single remote control device, firmware update, controller and goggles warnings. dji.com/uk/avata-360/downloads
- DJI Avata 360 Release Notes (2026.04.23): firmware versions, restart after update, RTH Altitude and Max Distance reset. dji.com/uk/avata-360/downloads
- DJI Avata 360 FAQ (UK): compatible controllers and goggles, one-to-one binding. dji.com/uk/avata-360/faq
- DJI Avata 360 specs (UK): takeoff weight approx 455 g. dji.com/uk/avata-360/specs
- CAA, Registering to fly drones and model aircraft: caa.co.uk registering



